BFKFD - SYNTHOLVAR SHH,120/210,302,200

  • MSDS: BFKFD
  • Manufacturer: VARFLEX CORP
  • Product Name: SYNTHOLVAR SHH,120/210,302,200
  • National Stock Number: 5970-00-661-0498
Product Identification

Product ID:SYNTHOLVAR SHH,120/210,302,200
MSDS Date:01/01/1987
FSC:5970
NIIN:00-661-0498
MSDS Number: BFKFD

Responsible Party
VARFLEX CORPORATION

Emergency Phone: (315)336-4400

Cage: 79074

Contractor
VARFLEX CORPORATION
ROME, NY 13440 US

Telephone: 315-336-4400

Cage: 79074

Ingredients

PLASTICIZED POLYVINYL CHLORIDE


PIGMENTS

Fraction By Weight: 5%

ACGIH TLV: NOT SPECIFIED


ADDITIVES

Fraction By Weight: <0.5%

ACGIH TLV: NOT SPECIFIED

Hazards

Effects of Overexposure:NONE SPECIFIED BY THE MFR;MAY IRRITATE EYE,SKIN
AND RESPIRATORY TRACT.

First Aid

First Aid:INHALE:REMOVE TO FRESH AIR, GIVE CPR/O*2 IF
NEED;EYES/SKIN:FLUSH W LG AMTS H*2O FOR 15 MIN;INGEST:RINSE MOUTH;
GET MEDICAL ATTENTION FOR EYES, BREATHING DIFFICULTY, OR OTHER
SYMPTOMS OF OVEREXPOSURE.

Fire Fighting

Extinguishing Media:WATER,CO*2,DRY CHEMICAL,FOAM
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA IN CONFINED AREA
Unusual Fire/Explosion Hazard:HCL LIBERATED DURING COMBUSTION AND AT
500F OF >.

Accidental Release

Spill Release Procedures:USE NIOSH APPROVED PERSONAL PROTECTION;USE
NORMAL PROCEDURES AND RECOVER FOR PROPER DISPOSAL.

Handling

Handling and Storage Precautions:STORE IN ABSENCE OF SUNLIGHT AT
70F;KEEP CONTAINER CLOSED WHEN NOT IN USE.
Other Precautions:AVOID CONTACT WITH SKIN AND EYES;DO NOT BREATHE
CONTAMINANT.WASH THOROUGHLY AFTER EACH USE.

Exposure Controls

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR FOR THE ITEM
AS NEEDED.
Ventilation:LOCAL EXHAUST TO MAINTN BELOW TLV.
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY/CHEM GOGGLES
Other Protective Equipment:FULL WORK CLOTHING TO PREVENT REPEATED OR
PROLONGED CONTACT.
Supplemental Safety and Health
MSDS UNDATED.

Chemical Properties

HCC:N1
Spec Gravity:1.30
Solubility in Water:NEGLIGIBLE
Appearance and Odor:NO ODOR OR VERY MILD NON OFFENSIVE ODOR

Stability

Stability Indicator/Materials to Avoid:YES
SILVER,COPPER UNDER CERTAIN CONDITIONS,CAN CAUSE CORROSION.
Stability Condition to Avoid:TEMPERATURE OVER 400F
Hazardous Decomposition Products:NONE NOTED

Disposal

Waste Disposal Methods:DISPOSE OF COLLECTED MATERIAL IN ACCORDANCE WITH
LOCAL,STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.